No CNC or woodworking experience required.
Get started with CNC (Computer Numerical Controlled) machining using VCarve. This easy-to-learn software allows you to create and cut parts using a ShopBot CNC router.
Learn. Students will be brought through the process of creating / importing a design with Vectric's VCarve program. We'll create tool paths for export to the ShopBot CNC Router, to run our cuts for the two inlay pieces (the inlay material and the base or "pocket"). After the cut program is run, the inlay pieces will be glued together; once the glue is set, we will clean up our beautiful inlays.
Make. Students will make a walnut cutting board with a maple inlay of their own design. There is an additional charge for materials.
Saturday, July 23 | 9am - 1pm
Cost: $60 members; $72 supporters; $80 non-members Addtl. Materials Fee: $15
Financial aid may be available. Contact info@hatchspace.org for details.
Instructor: Nick Moorhouse
Payment and Refund Policy
Payment is due at the time of registration. Unpaid registrations are subject to cancellation.
Full refunds or a class credit can be provided if you cancel at least 14 days before the start of the class by contacting info@hatchspace.org or by calling 802-257-3935.
There are no refunds, transfers, make-ups or deferments for missed classes.
HatchSpace reserves the right to cancel any class for any reason. A class may be canceled in the event the minimum number of students for the class is not reached. In this case, registrants will receive a full refund or class credit, and notified by valid email provided at registration.
